Hard Hat
Hard Hat
Hard Hat H-703R Blue
▶ Passed ANSI Z89.1-2003 standard (Type I /Class C, G and E)
▶ Passed CNS 1336 standard material is high density polyethylene (HDPE)
▶ Easy installation has 4 points and 6 Point inner straps can be selected
▶ The inner straps can be applied to various head types. There are two options of knob and fixed hole.
▶ Motorola GP320/340 dedicated adapter cable
Hard Hat H-703V Blue
▶ Material is high density polyethylene (HDPE)
▶ Pass ANSI Z89.1-2003 standard (Type I /Class C, G and E)
▶ Pass CNS 1336 standard
▶ Ventilation hole design
▶ Easy to install, 4 and 6-point inner straps are available
▶ The inner strap can be applied to various head types. There are two options of knob and fixing hole.
▶ The noise checker SE-400 is used for precision The measured noise sound pressure level is higher than the high-variable noise environment
Hard Hat H-705R Red
▶ Material is high density polyethylene (HDPE) ▶ Passed ANSI Z89.1-2003 standard (Type I /Class C, G and E)
▶ Passed CNS 1336 standard
▶ Easy to install, 4 and 6-point inner straps are optional
▶ The inner head can be applied to various head types. There are two options of knob and fixing hole.
▶ Motorola GP344 dedicated adapter cable
AO Tuffmaster® Face Shields & Visors WP96C, 82702-00000
▶ Composition: Polycarbonate ▶ Certification standard: ANSI Z87.1-2003
▶ AO Tuffmaster® dark green high temperature resistant mask, green mask to reduce light irritation to the eyes
▶ Quick-change mask assembly design without tools or fasteners, etc.
▶ Mask material High transparency, impact resistance and heat resistance
▶ The face shield is fixed to the inner layer of the helmet to enhance the impact resistance
▶ It needs to be used with an AO Tuffmaster® helmet. The helmet type can be selected according to different environmental needs. The face shield can be lifted or put down
▶ Suitable for general workplaces to prevent face from shock hazards
Versaflo™ Respiratory Faceshield Assembly with Premium Visor and Faceseal M-107
▶ Hood accessories
▶ Suitable for 3M™ P&SA system
▶ M series hard hat parts
Versaflo™ Face Shield Head Insert M-170/37318(AAD)
▶ White cover
▶ Suitable for 3M™ P&SA system
▶ M series hard cap parts
Hard Hat H-702R Yellow
▶ Pass ANSI Z89.1-2003 standard (Type I /Class C, G and E)
▶ Pass CNS 1336 standard
▶ Material is high-density polyethylene (HDPE)
▶ Easy installation 4 o’clock and 6 o’clock inner straps are optional
▶ The inner straps can be used for various head types. There are two options of knobs and fixing holes.
▶ Hearing protection earmuffs can be used with communication equipment
Hard Hat H-702V Yellow
▶ Pass ANSI Z89.1-2003 standard (Type I /Class C, G and E)
▶ Pass CNS 1336 standard
▶ Material is high density polyethylene (HDPE)
▶ Ventilation hole design
▶ Easy installation, 4 and 6-point inner straps are available for selection.
▶ The inner strap can be applied to various head types. There are two options of knob and fixing hole.
▶ High soundproof standard FLEX wiring communication type Earmuffs
Hard Hat Suspension Replacement H-700-RS4
▶ 4-point knob inner lining
▶ Knob design
▶ Replace H-700 series lining
▶ Easy to replace
Faceshield Holder For Hard Hat H24M
▶ Certification standard: ANSI Z87.1-2003
▶ Use with most helmets attached to the mask
▶ Metal bracket material design suitable for high temperature environments
▶ The mask can be lifted up or down and can be fixed in the lifted position
▶ The mask is easy to disassemble and has a variety of material sizes to choose from.
▶ It can be connected to the applicable 3M™ mask material according to the needs of the work site.
▶ The unique way of fixing the helmet does not affect the ears connected to the helmet Hood use
Versaflo™ Peel-Off Visor Cover S-922/37302(AAD)
▶ Prevent spraying and scratching
▶ Transparent hood accessories
▶ Use with S-600, S-700, S-800
Versaflo™ Standard Visor M-925/37323
▶ PC material
▶ Suitable for 3M™ P&SA system
▶ Economical replacement mask for 3M™ Versaflo™ M series hood
Transparent FaceShield 5F-11
▶ Transparent face shield
▶ PC material anti-fog and anti-scratch
▶ Weight about 138 grams
▶ Use with G500 helmet
Hard Hat H-706R Orange
▶ Pass ANSI Z89.1-2003 standard (Type I /Class C, G and E)
▶ Pass CNS 1336 standard
▶ Material is high-density polyethylene (HDPE)
▶ Easy installation 4 o’clock and 6 o’clock inner straps can be selected
▶ The inner straps can be applied to various head types. There are two options of knob and fixing hole.
▶ Hearing protection earmuffs that can be used with communication equipment
Hard Hat H-706V Orange
▶ Pass ANSI Z89.1-2003 standard (Type I /Class C, G and E)
▶ Pass CNS 1336 standard
▶ Material is high density polyethylene (HDPE)
▶ Ventilation hole design
▶ Easy to install the inner girth, there are 4 and 6-point inner girdle optional
▶ The inner girder can be applied to various head types, and there are two options of knob and fixing hole
AO Tuffmaster® Face Shields & Visors WP96IR, 82705-10000
▶ Composition: Polycarbonate (Polycarbonate)
▶ Certification standard: ANSI Z87.1-2003
▶ The mask material has impact resistance and heat resistance, suitable for electric welding operations to prevent face from impact hazards
▶ fixed Enhance the impact resistance of the inner layer of the helmet
▶ Quickly replace the mask assembly design without tools or fasteners, etc.
▶ Need to be used with AO Tuffmaster® helmets. The helmet type can be selected according to different environmental needs. The mask can be lifted up or down
Faceshield and earmuffs package G500V5F11H510-GU
▶ G500V5F11H510-GU face shield and earmuffs package integrates face and hearing protection
▶ includes P3E earmuffs
▶ suitable for cutting, grinding, and logging operations
FaceShield 5E-11
▶ Darkness 5 visor
▶ PC material anti-fog and anti-scratch
▶ weight 140 grams
▶ use with G500 helmet
V5 Metal Mesh FaceShield 5B
▶ G500 face shield group special metal mesh face shield
▶ shading rate 45%
▶ suitable for large particle splash protection
▶ weight 45g
▶ mesh size about 1x1 mm