Fire Barrier Caulk
Fire Barrier Caulk
3M™ CP25WB+ Caulk
▶ High-performance, high-quality intumescent water-based latex
▶ It expands and seals the gaps that are swallowed by fire when it burns with water-proof sealing effect
▶ It also has heat-absorbing properties and releases crystal water when exposed to fire to reduce the surface temperature of the penetrating material.
▶ No sticky hand, quick drying and no sag; 10-15 minutes to reach finger surface drying
▶ Brown can be painted for 72 hours
▶ The maximum filling thickness can reach 20 inches of metal under 2 inches 2 hours fire-resistant aging of the tube
▶ life span passed certification
▶ can be combined with any 3M™ material
3M™ Fire Barrier Sealant FD150+
The more economical water-based fire-resistant mud that absorbs heat and does not expand can be used for fire protection of metal pipes or cables running through concrete or gypsum. It can also be used for dynamic wall roof systems.
▶ Quick-drying, no sag, safe, solvent-free
▶ Easy tortuosity performance allows general pipeline activities
▶ Water-based material is easy to install, clean and handle
▶ High hardness formula to avoid shrinkage
▶ High consistency provides high-quality filling performance
▶ Up to 3 hours of F Rating fire protection aging
▶ Can be used for construction with general caulking gun or soil mending knife
3M™ IC15WB Caulk
The price of this fire-resistant mud is reasonable to help you save your budget. The unique expansion performance allows the IC15WB fire-resistant mud to keep flames and smoke in place. IC15 WB fire-resistant mud is available in a variety of sizes and can be filled with standard caulking guns, pneumatic pumps, putty knives or trowels.
▶ Cost saving
▶ UL Listed Certification
▶ Bright yellow for easy inspection
▶ It is a sealant for single flame, smoke, gas and water
3M™ Moldable Putty+
Single-agent halogen-free products are suitable for electrical switch boxes or various fire protection zones. The penetration includes cables, conduits, insulation pipes, metal or non-metal pipes.
▶ Easily molded into various shapes and deflection
▶ Only stick to the work surface, not your fingers
▶ High surface compliance and easy construction
▶ Wide range of UL certifications
▶ Demonstration of excellent weather resistance
▶ Can be reused before swelling occurs
▶ Can be combined with any 3M material
3M™ Fire Barrier Water Tight Sealant 1000NS
▶ UL fire protection aging is up to 3 hours, suitable for fireproof floor and wall penetrations and joints
3M™ Fire Block FB136
Silicone joint sealant (single-component ready-to-use elastomer) and siliceous foamed fireproof cotton (two-component mixed foamed elastomer) have the following characteristics for fireproof filling:
▶ Meet ASTM E-136, current 2003 IBC, 2003IRC, 2003 IRMC, 2003 IFGC and NFPA 5000 air flow, smoke and flame sealing requirements
▶ One-piece non-combustible product can seal airflow, smoke and flames, block high temperature and smoke from entering the building structure without fire resistance
▶ With super adhesion and packing rate, no sag, using halogen-free formula
▶ Can be used with standard caulking gun, pneumatic pump, soil mending knife or trowel
▶ It can be attached to concrete, masonry, metal, wood, plastic and cable jacket without mixing
3M™ Water Tight Sealant 3000WT
▶ UL's fire-resistance aging is up to 4 hours. It is a one-piece and torture high-quality neutral silicon caulking material without sagging
▶ Pass the UL watertight test at the same time-ANSI/UL 1479 meets the requirements of the test and listing system W class 1
▶ Form an elastic seal in a humid environment. It is suitable for openings of fire retarding devices, fireproof floors, walls and other building partitions and facilities; as long as the installation is correct, this product can help control the spread of flames, smoke and toxic gases.
FEATURE
It is a fire retardant material, clay made of fire-resistant material, which can be reused and is often used for filling ground welding molds.
Effectively block the penetration of fire, smoke, heat, poisonous gas and water. It can be used to fill PVC pipes, line pipes, cables, and plastic pipes to form a strong partition wall to prevent the spread of fire or toxic gases.
PRODUCT DESCRIPTION
The high-performance high-quality water-based latex expanded fire clay, non-toxic ingredients. Both absorbing properties, it can release water of crystallization in Fire, through lowering the surface temperature. In case of thermal expansion, fill seal burning fire engulfed the void. Construction without special tools, not sticky, quick-drying does not sag.