Telflon Joints
Telflon Joints
Telflon Joints DK8000
▶ The correct installation can make the Teflon anti-vibration joint achieve the most effective application. It must be installed as close to the seismic source as possible to eliminate the vibration of the equipment at the back end. Its installation has nothing to do with the direction of the pipeline fluid.
▶ The vibration displacement can be horizontally offset, and the Teflon shockproof joint can be installed at the farthest place. It is also a way to make the axial direction have an appropriate angle and the vibration can occur in this range. It can effectively absorb the vibration source and prevent the pipeline from being damaged.
Telflon Joints DK8100
▶ The correct installation can make the Teflon anti-vibration joint achieve the most effective application. It must be installed as close to the seismic source as possible to eliminate the vibration of the equipment at the back end. Its installation has nothing to do with the direction of the pipeline fluid. ▶ Vibration displacement is laterally offset. It is also a way to install Teflon anti-vibration joints at the farthest place to make the axial direction have an appropriate angle and vibration can occur in this range. Inertial motion can effectively absorb the vibration source to prevent pipeline damage.
Telflon Joints DK8200
▶ The correct installation can make the Teflon anti-vibration joint achieve the most effective application. It must be installed as close to the seismic source as possible to eliminate the vibration of the equipment at the back end. Its installation has nothing to do with the direction of the pipeline fluid.
▶ The vibration displacement can be horizontally offset, and the Teflon shockproof joint can be installed at the farthest place. It is also a way to make the axial direction have an appropriate angle and the vibration can occur in this range. It can effectively absorb the vibration source and prevent the pipeline from being damaged. .
FEATURE
Polytetrafluoroethene (PTEF) products of these four materials are generally collectively referred to as "non-stick coating" and "easy clean wok material" is a synthetic polymer material that uses fluorine to replace all hydrogen atoms in polyethylene. This material has the characteristics of resistance to acid, alkali, and various organic solutions, and is almost incompatible with all solvents. At the same time, PTFE has the characteristics of high temperature resistance, and its friction coefficient is very low, so it can be used for lubrication, and it has become an ideal coating for the inner layer of non-stick pots and water pipes.
PRODUCT DESCRIPTION
Use performance Elastomers P.R.F.E bellows material,with acid,alkali,corrosion-resistant properties. Suitable for chemical and equipment systems.